Available for double rack  #2500-C

• Provided with a simple and complete lock-in system. This option allows you to easily add a stepladder of 6' to 8' on the rack.

The base of stepladder cannot exceed 660mm (26'')

• provided with a simple and complete lock-in system. This option allows you to safely transport a second stepladder of 6' or 7'.

It is recommended to install the longest stepladder on the main level.

Available in grey PVC or anodized aluminum

• This tube is equipped with a front cap and rear door, made of aluminum casting and provided with the hardware for installation.
  • (Possibility of installing up to 3 tubes for model 2500-A)
  • (also up to 4 tubes for model 2500-C)
  • Tube of grey PVC (12 feet): #SEO-3750
  • Anodized aluminum 124'' in lenght : #SEO-3580.
  • 4 1/2'' door kit : with a front cap, rear door and the installation hardware (tube not included) #SEO-3580-2

Available in grey PVC

• This tube is equipped with a front cap and rear door, made of aluminum casting and provided with the hardware for installation.
  • Tube of grey PVC (12 feet) : #SEO-3080 (Possibility of installing up to 2 tubes for model 2500-A et 2500-C)
  • 6 1/2'' door kit : with a front cap, rear door and the installation hardware (tube not included) # SEO-3080-2

• Kit of two (2) bars of stainless steel install under the crossing bars of the rack to increase the load capacity.

This reinforcement is recommended for the addition of a conduit carrier or a central equipment when the total weight at the centre of the rack exceed 110 lbs (50 kilos).

• These adjustable hooking brackets of stainless steel are easily adjustable and very practical, to help you secure the transportation of any additionnal equipment you might have.